|
|
 |
Fleshlight Blade vs. Fleshjack Sword - Test Review & Comparison |
 |
 |
With the Fleshlight Blade and the Fleshjack Sword, the Fleshlight manufacturer ILF proves yet again that it is still possible to develop new and creative concepts in the field of masturbators. The manufacturer has not shied away from reinventing itself and striving to rework and perfect its own well-proven operating principle.
Through these efforts, a completely new product line has been created - Fleshlight Blade & Fleshjack Sword - which represents an innovative further development of the ordinary Fleshlight.
The fundamental structure is similar to the Fleshlight: an extremely soft and skin-like insert made of "Real Feel Superskin" is placed inside a case that can be closed with two caps. In contrast to the ordinary Fleshlight, the case is not made of hard-plastic material but of a special kind of flexible rubber.
It is therefore possible to squeeze the masturbator during use, thereby tightening the diameter of the inner canal and increasing the level of stimulation intensity at different points of the inner texture as much as you like.
The squeezing of the Blade/Sword case works surprisingly well in practice and is not simply just an advertising gimmick. The consistency and elastic recovery of the material used is comparable to that of a soft rubber eraser.
In fact, you can even feel your penis through the material of the case and the insert and therefore it is easy to find the most stimulating pressure points on the case surface.
 |
| Fleshlight Blade - squeezable case with front cap and removed insert |
In order to make the case easily squeezable, it has a triangular shape and, with a length of 8.6 inches (22 cm), it is a bit slimmer and smaller than the ordinary Fleshlight case (9.8 inches / 25 cm) and a bit bigger than the "Sex in a Can" (7.9 inches / 20 cm).
The case is designed like a samurai sword handle and accordingly the masturbators have been named "Fleshlight Blade" and "Fleshjack Sword".
Thanks to the sword handle shape and the non-slip surface, the masturbator sits perfectly in the hand and is easy to handle. However, a masturbator with such a design is quite conspicuous and could draw attention to itself more so than the discreet flashlight shape of the ordinary Fleshlight or the beer can shape of the Sex-in-a-Can.
 |
 |
Masturbator case size comparison:
Fleshlight, Blade, Sex in a Can |
Comparison of the insert size:
Fleshlight, Blade, Sex in a Can |
The soft Blade/Sword insert can be removed from the case and therefore can be warmed up separately prior to use and easily cleaned after use. In contrast to the ordinary Fleshlight insert, the canal walls are a bit thicker and the air chambers (between the case and the insert) formed by the four side wings are smaller.
This ensures, despite the high flexibility of the case, that relatively strong counter-pressure is maintained inside the inner canal and that results in an overall stronger tightness sensation than inside the ordinary Fleshlight. Compared to the Sex-in-a-Can, the tightness is, however, a bit less noticeable.
Because of the triangular shape of the Blade/Sword insert, insertion is a bit more difficult than with the Fleshlight. It proved best to place the insert halfway into the case and then grab it through the rear hole and pull it into the case until it is properly positioned.
By the way, you can also place (with a little squeezing) ordinary Fleshlight inserts into the Blade/Sword case. This indeed was not the intention of the manufacturer and it does not fit perfectly but it gives you the opportunity to experience your ordinary Fleshlight inserts (which you may already own) with the "squeezing feature" and increased tightness in a completely different way.
 |
 |
| Fleshlight Blade case with closed front cap |
rear case cap of the Fleshlight Blade |
Like the ordinary Fleshlight, the Blade/Sword case can be closed with a large front cap and a small rear cap. However, the two caps cannot be screwed onto the case but can only be stuck on because the soft rubber material is not suitable for screw threads.
The function of the large front cap is to protect the insert orifice against dust and environmental elements during storage.
In contrast to the Fleshlight and the Sex-in-a-Can, the small rear cap is not designed for regulating the suction inside the inner canal because the absence of screw threads makes this impossible. You can either remove the cap completely (then there is no suction) or leave it inside.
If you leave the cap inside the case, a pleasurable suction effect is noticeable, which is enabled by four tiny air holes in the back side of the case. A small amount of air can flow out through these air holes and upon the backward movement, air is drawn inside.
During fast movements inside the canal, this air flow however creates a bit more noise than inside the Fleshlight or the Sex-in-a-Can in which the air holes (at the rear screw threads) are much larger and create less resistance to the air flow.
The other advantages of the small rear cap are that the case can be better cleaned and the insert (after removal) can be placed back into the case more easily.
Currently, the number of different orifices and canal textures offered in this product line is rather limited. You only have a choice between the "Fleshlight Blade" with a pussy orifice and a ribbed multi-chamber texture or the "Fleshjack Sword" with a butt orifice and a bumped multi-chamber texture.
Once the new concept receives positive feedback from Fleshlight fans, which I fully expect will happen, additional models with new orifices and textures will certainly come out in the future.
|
|
|
Fleshlight Blade / Fleshjack Sword inner textures
|
|
The inner textures below are available as the Blade/Sword insert with one specific orifice only. Compared to the ordinary Fleshlight canal length, these canals are 1.6 inch (4 cm) shorter.
|
Fleshlight Blade (Pussy)
|
|
Fleshjack Sword (Butt)
|
|
 |
Blade / Sword product models overview
|
 |
|
|
|
